Strength in Products, Strength in Service

Casappa Fluid Power Design and Anfield Industries AP Series Gear Pumps and AFD1 series Flow Dividers

Casappa Fluid Power Design- Constant evolution and passion for hydraulics! This has been the key to turning the Casappa of 1952, a manufacturer of hydraulic pumps into today’s business enterprise. Finrel is the financial holding company owned by the Casappa family that controls companies and subsidiaries.

Anfield Industries Inc.-  A complete range of high quality, pressure balanced, gear pumps to customers nationwide. Our Anfield AP series gear pumps are available in mini, SAE, AA, SAE A, and SAE B sizes with stocked displacements from .009 in3 to 5.43 in3. The AP-0 and AP-1 feature aluminum construction, 25 micron filtration, and a 12 to 32 psi inlet pressure range. The AP-10, AP-20, AP-30, and AP-20A line includes SAE AA, A, and B mounts with a cast iron flange and aluminum housing. Our AP-HL and AP-HFL are HI/LO gear pumps that will operate at a max pressure of 900 psi for the low pressure pump, while reaching 3000 psi for its high pressure. This unit features cast iron end plates and will automatically change from LO to HI pressure in order to meet load requirements. Finally, with our AFD1 series Rotary Gear Flow Divider, you can work from a single pump source to synchronize multiple cylinder operations, intensify pressure to exceed pump capacity, or divide pump flow among several circuits. For more information about these products please Contact Us or view more information below.

 

CASAPPA fLUID pOWER DESIGN

AP-0 Gear Pump
  • Axial Piston Pumps and Motors
  • Gear Flow Dividers
  • Hydraulic Gear Pumps
  • Hydraulic Motors
  • Filtration- Ikron

Request a Quote

AP-PTO Gear Pump

AP-0 Gear Pump
  • PTO Driven gear pump constructed with cast iron and plates and is available with aluminum or cast iron gears
  • 6 tooth or 21 tooth female spline drive
  • Standard ports are SAE 16 inlet and SAE 12 outlet
  • Displacement: 3.41 to 9.76 cubic inch/revolution

AP-0 Gear Pump

AP-0 Gear Pump
  • Filtration: 25 micron or better
  • Oil Viscosity: 6 to 200 cSt
  • Inlet Pressure: 12 to 32 psi absolute
  • Displacement: 0.16 to 2 cm3/rev
  • Max Speed: 7000 RPM

AP-1 Gear Pump

AP-1 Gear Pump
  • Filtration: 25 micron or better
  • Oil Viscosity: 6 to 200 cSt
  • Inlet Pressure: 12 to 32 psi absolute
  • Displacement: 1.1 to 8 cm3/rev
  • Max Speed: 6000 RPM

AP-10 Gear Pump

AP-10 Gear Pump
  • Filtration 25 micron or better
  • Oil Viscosity: 6 to 200 cSt
  • Inlet Pressure: 12 to 32 psi absolute
  • Displacement: 1.3 to 3.82 cm3/rev
  • Max Speed: 5000 RPM

APQ-20 Gear Pump

 AP-20 Gear Pump
  • Filtration: 25 micron or better
  • Oil Viscosity: 6 to 200 cSt
  • Inlet Pressure: 12 to 32 psi absolute
  • Displacement: 4.5 to 25 cm3/rev
  • Max Speed: 3600 RPM
  • 14 Tooth gear set for quiet operation

AP-20A Gear Pump

 AP-20A Gear Pump
  • Filtration: 25 micron or better
  • Oil Viscosity: 6 to 200 cSt
  • Inlet Pressure: 12 to 32 psi absolute
  • Displacement: 25 to 40 cm3/rev
  • Max Speed: 3000 RPM

AP-30 Gear Pump

AP-30 Gear Pump
  • Filtration: 25 micron or better
  • Oil Viscosity: 6 to 200 cSt
  • Inlet Pressure: 12 to 32 psi absolute
  • Displacement: 22 to 89 cm3/rev
  • Max Speed: 3000 RPM

AP-HL - HI/LO Hydraulic Gear Pump

AP-HL - HI/LO Hydraulic Gear Pump
  • Filtration: 25 micron or better
  • Oil Viscosity: 6 to 200 cSt
  • Inlet Pressure: 12 to 32 psi absolute
  • Displacement: (LO) 0.385 to 0.793 in3/rev
    (HI) 0.13 to 0.265 in3/rev
  • Flow GPM: 8 to 16 @ 3600r/min

AP-HFL - HI/LO Hydraulic Gear Pump

AP-HFL - HI/LO Hydraulic Gear Pump
  • Filtration: 25 micron or better
  • Oil Viscosity: 6 to 200 cSt
  • Inlet Pressure: 12 to 32 psi absolute
  • Displacement: (LO) 0.464 in3/rev
    (HI) 0.93 to 1.397 in3/rev
  • Flow GPM: 22 to 28 @ 3600r/min

AFD1 - Series Rotary Gear Flow Dividers

AFD1 - Series Rotary Gear Flow Dividers
  • Flow accuracy: +/- 1.5% - 2%
  • Displacement: 0.385 to 0.793 in3/rev
  • Up to 9 gpm

Back to Top